Qxld3 timing marks

Homepage › Forums › Members Area › Sharing my little bit of knowledge! › Qxld3 timing marks

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • December 25, 2015 at 07:46 #11553
    rjkinney
    Participant

    I am assembling my engine and notice my crank gear and cam gear have punch marks which I assume get lined up. My question is what is the s for on the crank gear and what is the punch mark for on the water pump gear when the distributor is drivin off of a worm gear. Qxld3
    Thanks

    December 25, 2015 at 10:06 #11554
    Donreid
    Participant

    Merry Xmas you must have gotten some engine parts from Santa! Anyway From what I can remember when doing my QXLD motor The marks line up the distributor timing for number 1 spark at top dead center.. Don The Dishwasher

    December 25, 2015 at 10:18 #11555
    rjkinney
    Participant

    Thanks and merry Christmas to you. I wish I would have taken more pictures when I tore it apart. So with cam and crank marks lined up distributor should be installed so that the rotor is pointing at no 1 cylinder correct? Im still curious as to what the letter s is on the crank gear and why the water pump gear is punched? Id hate to get it all together and have something wrong.

    January 4, 2016 at 01:10 #11580
    Fred Engelhard
    Participant

    Hello
    The water pump gear has no set point. As far as where # 1 go that where ever you put it.

    Fred
    Still having fun working on my 201

    Hello Don

    January 4, 2016 at 01:14 #11581
    Fred Engelhard
    Participant

    Sorry the s on the cam is to show gear size

    January 4, 2016 at 05:36 #11582
    rjkinney
    Participant

    Ok thanks for your help. That clears things up.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.