DT FRONT AXLE FELT SEALS :
1.) The 1936 – 1938 Model 80 uses the 2″x 2 13/16 ” x 3/8 ” Felt Seal .
2.) The 1939 Model 201 uses the same Felt Seal as the Model 80 ;
( 2″ x 2 13/16″ x 3/8 ” ) .
3.) The 1940 – 1949 Model 201 uses the 2 1/8″ x 2 – 7/8″ x 7/16″ Felt
Seal .
4.) The CLARK Felt Seal part # 11E – 22 ( IF STILL AVAIBLE ? );
( from the CLARK FORKLIFT DEALER OR THE BERNS CO. ).
fits the following Diamond T Trucks :
1936 1946 Model 201C ; 1939 Model 306C ; 1938 – 1946 Model 404 ;
1936 – 1938 Model 212AS and the 1936 – 1938 Model 220 and 221S .
NOTE: OTHER VEHICLES THAT USED THESE FELT SEALS :
THE 1933 – 1935 BUICK 8 , MODEL 50 , USED ONE OF THEM IN THE
REAR AXLE ; THE 1927 – 1931 DODGE TRUCK USED ONE OF THEM IN THE TRANSMISSION AND THE LATE 1926 – 1929 NASH 6 USED
ONE OF THEM AS A PINION SEAL .
APPLICATION INFORMATION WRITTEN BY Bill Pohl ; D T REGISTER MEMBER ; The Elusive Model 201 Front Axle Grease Seal .
PUBLISHED IN THE DIAMOND T REGISTER VOLUME 1989 # 2 .
PUBLISHED BY Bill Wielinski
.
.